Navpod GP1900-14 SailPod for Humminbird SOLIX 10 for 9.5 wide guard Marine Navigation & Instruments
NAVGP190014 SailPod
Model: GP1900-14- Pre-cut SailPod for Humminbird SOLIX 10 for 9.5? wide protection
SailPods are intended for mounting a single radar or chartplotter at the helm. Navigation at your fingertips. "Where do you need it? When you need it." Sail Pods are the smart solution for mounting your radar or chartplotter to the helm where you can easily operate it and clearly see small details on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Nickel-chrome plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. It is best to mount a SailPod on a single bend AngleGuard or use an AngleGDual-curvature uard to fit an InstrumentPod on the top vertical section and a SailPod below on the angled section.
Structural Rigidity — Gen3 enhancements now available include thicker gauge acrylic-coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof seal — All SailPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SailPods are designed to withstand off-shore conditionsmost difficult and wet shores. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronic devices. The gasket will continue to do its job.
Chrome Nickel Plated Stainless Steel — We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-resistant, nickel-chrome-plated stainless steel screws for added security and a bit of style!
Commitment to Quality We stand by ourcommitment by offering a 10-year warranty on all new NavPods Gen3.
SpecificationsOverall | |
Height | 9.1 |
Width | 14.25 |
Depth | 5.94 |
Usable side | |
Height | 7.4 |
Width | 12, 4 |
Depth | 4.5 |
Maximum cutout | |
Height | 7.75 |
Width | 12.75 |
View tilt angle | |
Width | 10 |
NAVGP190014 SailPod
Model: GP1900-14- Pre-cut SailPod for Humminbird SOLIX 10 for 9.5? wide protection
SailPods are intended for mounting a single radar or chartplotter at the helm. Navigation at your fingertips. "Where do you need it? When you need it." Sail Pods are the smart solution for mounting your radar or chartplotter to the helm where you can easily operate it and clearly see small details on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Nickel-chrome plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest offshore sailing conditions and humides. It is best to mount a SailPod on a single curvature AngleGuard or use a double curvature AngleGuard to mount an InstrumentPod on the upper vertical section and SailP.od below on the inclined section.
Structural Rigidity — Gen3 enhancements now include thicker gauge acrylic-coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof seal — All SailPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for yourmarine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poran Microcell polyurethane seal is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The gasket will continue to do its job.
Chrome Nickel Plated Stainless Steel — We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPod Gen3, we provide chrome nickel plated stainless steel. tamper-proof steel screwsr for added safety combined with a little style!
Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new NavPods Gen3.
SpecificationsGlobal | |
Height | 9.1 |
Width | 14.25 |
Depth | 5.94 |
Usable side | |
Height | 7.4 |
Width | 12.4 |
Depth | 4.5 |
Maximum cutout | |
Height | 7.75 |
Width | 12.75 |
View tilt angle | |
Width | 10 |
Save $274 when you purchase the Navpod GP1900-14 SailPod for Humminbird SOLIX 10 for 9.5 wide protection for only $165 from NVN Marine! Same day dispatch before 3 p.m. Navpod GP1900-14 SailPod for Humminbird SOLIX 10 for 9.5 Wide Protection Technical Specifications
Type: | Navigation & Marine Instruments | Instruments |
---|---|
Supplier: | NavPod |
For shipping policy detailed shipping, please see our shipping policy and you can find our return and refund policy here.
- NavPod GP1900-13 Pre-Cut SailPod for Simrad NSS9 evo2/B&G Zeus9 f/9.5" Wide Guard
- NavPod GP1900-09 Pre-Cut SailPod for Raymarine c95/c97/e95/e97 f/9.5" Wide Guard
- NavPod GP1900-06 Pre-Cut SailPod for Simrad NSS9 evo3 / B&G Zeus3 9
- NavPod GP1900-04 Pre-Cut SailPod for Garmin echoMAP CHIRP 92sv/93sv/94sv/95sv f/9.5″ Wide Guard
- NavPod GP1900-01 Pre-Cut SailPod for Raymarine es97/es98 f/9.5" Wide Guard
- Uncut NavPod GP1900 SailPod (Usable Face = 12.5"L x 7.8"H) (12.5" W x 7.8" H) f/9.5" Wide Guard
- NavPod GP1818 Pre-Cut SailPod for Furuno GP1870/GP1870F f/9.5" Wide Guard