NavPod PP4600-04 Pre-Cut PowerPod for Simrad NSS9 evo2/B&G Zeus2 9 Boat Outfitting

PP4600-04 Pre-Cut PowerPod for Simrad NSS9 evo2/B&G Zeus² 9

PowerPods are designed for serious boaters who cruise offshore. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned with a 20-degree tilt-back viewing angle.

PowerPods for Sail are intended to be mounted on a flat surface perhaps under the dodger or aft end of the cockpit table, particularly on sailboats.dual wheels.

High gloss material

NavPods are made with custom co-extruded ABS material with acrylic cap . We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The tight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM seal is now 50% thicker and is not subject to "compressiondefined" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome plated nickel screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deep sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The Process Manufacturing

Large gauge thermoforming is considered an art since many processes come into play. It all starts with tooling design and development. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will stand by our commitment to now offering a 10-year warranty on all new NavPods Gen3.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.
PRODUCT ID: 63936
SKU: NVN-63936
CSKU: CWR-63936
REWRITE: 75047-navpod-pp4600-04-powerpod-pre-cut-f-simrad-nss9-evo2- b-g
MPN: PP4600-04
UPC: 659988112269
ASIN: B0753JHK1B
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP4600- 04 Pre-Cut PowerPod f/Simrad NSS9 evo2/B&G Zeus2 9
NAME_EX: NAVPOD PRE-CUT POWERPOD FOR SIMRAD NSS9 EVO2/B&G ZEUS2 9
PTITER: NavPod PP4600-04 Pre-Cut PowerPod f/Simrad NSS9 evo2/B&G Zeus2 9
TYPE: Boat equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS

NavPod PP4600-04 PowerPod Pre-Cut f/Simrad NSS9 evo2/BG Zeus2 9

Gtags:

GSpecs:

NavPod PP4600-04 Pre-Cut PowerPod for Simrad NSS9 evo2/B&G Zeus2 9 Product Description

PP4600-04 Pre-Cut PowerPod for Simrad NSS9 evo2/B&G Zeus² 9

PowerPods are designed for serious boaters who go offshore. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned with a 20-degree tilt-back viewing angle.

PowerPods for Sail are intended to be mounted on a flat surface.ou the dodger or aft end of the cockpit table, especially on twin wheel boats.

The high gloss material

NavPods are made with custom co-extruded acrylic coated ABS material. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The tight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The joyInternal EPDM is now 50% thicker and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome plated nickel screws

We use all stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The Process Manufacturing

Large gauge thermoforming is considered an art since many processes come into play. It all starts with tooling design and development. We are fortunate to be able to count on engineers fromExperienced in-house design who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will have years of efficient service and a long-lasting glossy finish. We will deliver on our commitment by now offering a 10-year warranty on all new NavPods Gen3.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.

Frequently asked questions (FAQ)About NavPod PP4600-04 PowerPod Pre-Cut f/Simrad NSS9 evo2/B&G Zeus2 9 Who is NavPod?
How to describe NavPod PP4600-04 PowerPod Pre-Cut f/Simrad NSS9 evo2/B&G Zeus2 9?
Is it cut or not?
How to mount or what is the mounting style of NavPod PP4600-04 PowerPod Pre-Cut f/Simrad NSS9 evo2/B&G Zeus2 9?
Who is NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique waterproof seal, build quality and attractive design make the best-built instrument case ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof fasteners for added safety and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod PP4600-04 PowerPod Pre-Cut f/Simrad NSS9 evo2/B&G Zeus2 9? Compared to rack installation, PowerPods for Power are a better choice.PowerPods have the advantage of having a rotating base, which can provide a clean appearance for built-in installation. Is it cut or uncut? Cut How to mount or what is the mounting style of NavPod PP4600-04 PowerPod Pre-Cut f/Simrad NSS9 evo2/B&G Zeus2 9? Dash

Save $93 when you purchase the NavPod PP4600-04 Pre-Cut PowerPod for Simrad NSS9 evo2/B&G Zeus2 9 for only $326from NVN Marine! Same day dispatch before 3 p.m. NavPod PP4600-04 Pre-Cut PowerPod f/Simrad NSS9 evo2/B&G Zeus2 9 Technical Specifications

Type:	Boat Equipment \| Display Media
Supplier:	NavPod
Weight:	4.3 lbs
Cut/Uncut:	Coupe
Mount style:	Dashboard

NavPod PP4600 -04 Pre-cut PowerPodfor Simrad NSS9 evo2/B&G Zeus2 9 User ReviewsNavPod PP4600-04 Pre-Cut PowerPod for Simrad NSS9 evo2/B&G Zeus2 9 Shipping & Returns

Shipping Weight:	4.3 lbs
Box sizes:	9.00 (h) x 13.00 (l) x 14.00 (l)
Cubic Feet:	1638.0
Returnable:	Yes

To know the Detailed shipping terms, please see our Shipping Policy and you can find our Return & Refund Policy here.