NavPod PP4600-05 Pre-Cut PowerPod for Lowrance HOOK-9 Fishfinder/Chartplotter Boat Outfitting

PP4600-05 Pre-Cut PowerPod for Lowrance HOOK-9 Fishfinder/Chartplotter

PowerPods are designed for serious offshore boaters. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned with a 20-degree tilt-back viewing angle.

PowerPods for Sail are intended to be mounted on a flat surface. Perhaps under the hood or on the back of the cockpit table, especially on twin wheel boats.

The ultra glossy material

NavPods are made with a custom co-extruded ABS material. We use the best UV resistant material. Offers a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The waterproof seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. Thisis important when you need to open the NavPod in the future to service your electronic devices.

Nickel-chrome plated screws

We use All stainless steel mounting hardware included with each NavPod. Large round head tamper-proof screws have deeper sockets for the outer NavPC key for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large caliber thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interfacer with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We we are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will deliver on our commitment by now offering a 10-year warranty on all new NavPods Gen3.

PP4400 PowerPod Uncut Part Number: PP4400 Usable Area: 8.75" W x 6" H PP4400 PowerPod is uncut, the usable area is 8.75" W x 6" H and it covers an area of 5.37". PowerPods are better...
PRODUCT ID: 63938
SKU: NVN-63938
CSKU: CWR-63938
REWRITE: 75049-navpod-pp4600-05-powerpod-pre-cut-f-lowrance-hook-9-fishfinder-chartplotter
MPN: PP4600-05
UPC:
ASIN :
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP4600-05 Pre-Cut PowerPod for Lowrance HOOK-9 Fishfinder/Chartplotter
NAME_EX: NAVPOD PRE-CUT POWERPOD FOR LOWRANCE HOOK-9
PTITLE: NavPod PP4600-05 Pre-CUT PowerPod for Lowrance HOOK-9 Fishfinder/Chartplotter
TYPE: Boat Equipment Display Mounts
br> SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod - PP4600-05 PowerPod Pre-Cut f/Lowrance Hook-9 Fishfinder/ Chartplotter - Carbon Black

Gtags:

Fish finder
Chartplotter

GSpecs:

NavPod PP4600-05 Pre-Cut PowerPod for Lowrance HOOK-9 Sonar/Chartplotter Product Description

PP4600-05 Pre-Cut PowerPod for Lowrance HOOK-9 Sonar/Chartplotter

PowerPods are designed for serious boaters who sail offshore. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned with a 20-degree tilt-back viewing angle.

PowerPods for Sail are intended to be mounted on a flat surface.e under the hood or behind the cockpit table, especially on twin-wheel boats.

The high-gloss material

NavPods are made with a customer-made co-extruded acrylic coated ABS material. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The waterproof seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The EPDM internal sealis now 50% thicker and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.

Nickel-chrome plated screws

We We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large caliber thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have in-house design engineerss experienced using CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident that you will benefit from years of trouble-free service and a high standard of long-lasting glossy finish. We will deliver on our commitment by now offering a 10-year warranty on all new NavPod Gen3s.

PP4400 PowerPod uncut part number: PP4400 usable area: 8.75" W x 6" H PP4400 PowerPod is the uncut, usable surface measures 8.75" wide x 6" high and covers an area of ¢â'¬â€¹¢â'¬â€¹ of 5.37". PowerPods are best...

Frequently asked questions (FAQ) about the NavPod PP4600-05 PowerPod Pre-Cut f/Lowrance HOOK-9 Fishfinder/Chartplotter Who is the NavPod?
How to describe the NavPod PP4600 -05 PowerPod Pre-Cut f/ Lowrance HOOK-9 Fishfinder/Chartplotter?
Is it cut or uncut?
How to mount or what is the mounting style of the NavPod PP4600-05 PowerPod Pre-Cut f/ Lowrance HOOK-9 Fishfinder/ Chartplotter?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS The unique waterproof seal, build quality and attractive design make the best-built instrument case available. marinery industry Features of all NavPods include waterproof silicone seal, tamper-proof clips for security and convenience, concealed wiring and clean installation for easy access How to describe the NavPod PP4600-05 PowerPod Pre. -Cut f/Lowrance HOOK-9 Fishfinder/Chartplotter PP4400 PowerP?od Uncut Part Number: PP4400 Usable Area: 8.75" W x 6" H PP4400 PowerPod is uncut, usable area is 8.75" W x 6" H and covers an area of 8.75 "L x 6" H. ¬â€¹5.37". PowerPods are better...Is it cut or uncut? CutHow to mount or what is the mounting style of the NavPod PP4600 -05 Pre-Cut PowerPod f/Lowrance HOOK -9 Dash Sonar/Chart Plotter

Save $99 when you purchase the NavPod PP4600-05 PowerPod pre-cut for/Lowrance HOOK-9 Fishfinder/chartplotterfor only $320 at NVN Marine! Lowrance HOOK-9 cards

Type:	Boat fittings \| Display stands
Vendor:	NavPod
Weight:	4, 8 lb
Cut/Uncut:	Cut
Mounting style:	Dashboard

NavPod PP4600- 05 Pre-Cut PowerPod for Lowrance HOOK-9 Sonar/Chartplotter User ReviewsNavPod PP4600-05 Pre-Cut PowerPod for Lowrance HOOK-9 Sonar/Chartplotter Shipping & Returns

Shipping Weight :	4.8 lbs
Box sizes:	8.00 (h) x 11.00 (w) x 17.00 (l)
Cubic feet:	1,496 ,0
Returnable:	Yes

For detailed shipping terms, please see our shipping policy and you can find our returns and refund policy here.