NavPod PP4900-09 Pre-Cut PowerPod for Raymarine c95 c97 e95 and e97 - Carbon Black Boat Outfitting

PP4900-09 Pre-cut PowerPod for Raymarine c95, c97, e95 and e97 - Carbon Black

The PP4900 series PowerPods are a better option than stand mounting. PowerPods offer a sleek flush-mount look with the benefit of a swivel base.

The trunnion mount that comes with the marine electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

Sail PowerPods are ideal for mounting on a flat surface. Maybe under the hoodor on the back of the cockpit table, especially on twin wheel boats.

The Hi-Glosserial Mat

NavPods are made with custom co-extruded ABS material with an acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The tight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM seal isbut 50% thicker and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome plated nickel screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of tooling. We are fortunate to be able to count on experienced in-house design engineersés who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Today, with two decades of experience under our belt, we are confident you will have years of trouble-free service and a long-lasting glossy finish. We will deliver on our commitment by now offering a 10-year warranty on all new NavPods Gen3.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.
PRODUCT ID: 63955
SKU: NVN-63955
CSKU: CWR-63955
REWRITE: 75066-navpod-pp4900-09-powerpod-pre-cut-f-raymarine-c95-c97
br> MPN: PP4900-09-C
UPC: 659988112528
ASIN: B082B8TQ2C
WSKU:
SSKU :
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP4900-09 Pre-Cut PowerPod f/Raymarine c95, c97, e95 and e97 - Carbon Black
NAME_EX: PRE-CUT NAVPOD POWERPOD FOR RAYMARINE C95/C97,E95/E97
PTITLE: NavPod PP4900-09 Pre-cut PowerPod for Raymarine c95, c97, e95 and e97 - Carbon Black
TYPE: Boat fittings | Display Media
SUPPLIER: NavPod
ELECTRONICS> MARINE ELECTRONICS NAVPOD Powerpod pre-cut f/raymarine c95, c97, e95, e97 - carbon black

Gtags:

GSpecs:

NavPod PP4900-09 Pre-Cut PowerPod for Raymarine c95, c97, e95 and e97 - Carbon Black Product Description

PP4900-09 Pre-Cut PowerPod for Raymarine c95, c97, e95 and e97 - Carbon Black

PP4900 series, PowerPods are a better option than rack mounting. PowerPods offer a sleek flush-mount look with the benefit of a swivel base.

Sail PowerPods are perfect for mounting on a flat surface. Possibly under the aft or aft end of the cockpit table, especially on twin wheel boats.

The high gloss material

NavPods are made with custom co-extruded acrylic coated ABS material. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The tight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Improved themGen3 versions include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.

Chrome plated nickel screws

We use all stainless steel mounting bracket hardware provided with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large caliber thermoforming is considered an art since many processes come into play. All commonence through the design and development of tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will deliver on our commitment by now offering a 10-year warranty on all new NavPods Gen3.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which canprovide a clean appearance for a built-in installation.

Frequently Asked Questions (FAQ) about NavPod PP4900-09 Pre-Cut PowerPod for Raymarine c95, c97, e95 and e97 - Carbon Black Who is the NavPod ?
How to describe the NavPod PP4900-09 PowerPod Pre-Cut f/Raymarine c95, c97, e95 & e97 - Carbon Black?
Is it cut or uncut?
How to fit or Is this the mounting style of the NavPod PP4900-09 PowerPod Pre-Cut f/Raymarine c95, c97, e95 & e97 - Carbon Black?
Who is the NavPod? Navpod is a gambleA better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and professional installationpre for easy access. How to describe the NavPod PP4900-09 PowerPod Pre-Cut f/Raymarine c95, c97, e95 and e97 - Carbon Black? Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a clean appearance for built-in installation. Is it cut or uncut? Cut How to mount or what is the mounting style of the NavPod PP4900-09 PowerPod Pre-Cut f/Raymarine c95, c97, e95 & e97 - Carbon Black? Dash

Save $108 when you purchase the NavPod PP4900-09 Pre-Cut PowerPod for Raymarine c95, c97, e95 and e97 - Carbon Black for only $381from NVN Marine! Same day dispatch before 3 p.m. NavPod PP4900-09 Pre-Cut PowerPod for Raymarine c95, c97, e95 and e97 - Carbon Black Technical Specifications

Type:	Boat Equipment \| Display Media
Supplier:	NavPod
Cut/Uncut:	Cut
Mounting style:	Dash

NavPod PP4900 -09 Pre-Cut PowerPod for Raymarine c95, c97, e95 and e97 - Carbon Black User ReviewsNavPod PP4900-09 Pre-Cut PowerPod for Raymarine c95, c97, e95 and e97 - Carbon Black Shipping & Returns

For shipping policy detailed, please see our shipping policy and you can find our return and refund policy here.