NavPod SailPod Pre-Cut f/Raymarine AXIOM 12 f/9.5″ Wide Guard Boat Outfitting
Pre-cut SailPod for Raymarine AXIOM 12 for 9.5″ wide protection
SailPods are intended for mounting a single radar or chartplotter at the helm. Navigation at your fingertips. "Where you need it…when you need it." Sail Pods are the smart solution for mounting your radar or chartplotter to the helm where you can easily operate it and clearly see small details on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Nickel-chrome plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. It is best to mount a SailPod on a single bend AngleGuard or use a double bend AngleGuard to mount an InstrumentPod on the top vertical section and a SailPod below on the inclined section.
Structural Rigidity – The Gen3 improvements now include a thicker acrylic cap.d ABS material which improves resistance and offers better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof seal – All SailPods are manufactured with a double seal system providing excellent waterproofing. This seal offers the best protection for your marine electronics. SailPods are designed to withstand the harshest offshore sailing conditions and humides. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the SailPod in the future to service your electronic devices. The seal will continue to do its job.
Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-proof nickel-chrome-plated stainless steel screws for added security and a bit of style!
Commitment to quality -NWe back our commitment by offering a 10-year warranty. on all new NavPods Gen3.
Navigation at your fingertips. "In case of need...in case of need." Sail Pods are a smart solution for installing a radar or chart plotter at the helm station. You can...
PRODUCT ID: 66999
SKU: NVN-66999
CSKU: CWR-66999
REWRITE: 78110-navpod-sailpod-pre-cut-f-raymarine-axiom-12 -f-9-5
Manufacturer Part Number: GP1050-15
UPC: 659988114430
ASIN: B07JZKVQF7
WSKU: NAVGP105015
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod SailPod Pre -Cut f/Raymarine AXIOM 12 f/9.5" Wide Guard
EX_NAME: NAVPOD GP1050-15 SAILPOD PRECUT FOR AXIOM 12 FOR 9.5"
PTITLE: NavPod SailPod Pre-Cut f/Raymarine AXIOM 12 f/9.5" Wide Guard
TYPE: Boat Equipment | Display Mounts
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS
Title Amazon: NavPod GP1050-15 Pre-cut SailPod for Raymarine Axiom 12 for 9.5" wide protection (pre-cut is for surface mounting using rear mounting brackets)
NavPod Pre-cut SailPod for Raymarine AXIOM 12 for 9.5" wide protection
Gtags:
GSpecs:
NavPod Pre-cut SailPod for Raymarine AXIOM 12 f/9.5" Wide Guard Product description
Pre-cut SailPod for Raymarine AXIOM 12 for 9.5" Wide Guard
The SailPods are for mounting a single radar or chart plotter to the helm. Navigation at your fingertips. "Where you need it…when you need it." Sail Pods are the smart solution for mounting your radar or chartplotter to the helm where you can easily operate it and clearly see small details on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Nickel-chrome plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. It is best to mount a SailPod on a single bend AngleGuard ou use a dual-curvature AngleGuard to install an InstrumentPod on the top vertical section and a SailPod below on the inclined section.
Ural Rigidity Struct – Gen3 improvements now include a Thicker gauge acrylic coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof seal – All SailPods are manufactured with a double seal system providing excellent waterproofing. This seal offers the best protection for your marine electronics. SailPods are designedto withstand the most difficult and wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poran Microcell polyurethane seal is now 50% thicker and is not subject to "set compression" like many beer compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The seal will continue to do its job.
Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-resistant nickel-chrome-plated stainless steel screws for added security and a bitin style!
Commitment to quality -We back our commitment by offering a 10-year warranty. on all new NavPods Gen3.
Navigation at your fingertips. "In case of need...in case of need." Sail Pods are a smart solution for installing a radar or chart plotter at the helm station. You can...
Frequently asked questions (FAQ) about NavPod SailPodPre-cut for Raymarine AXIOM 12 f/9.5″ Wide Guard Who is the NavPod?
How to describe the NavPod SailPod Pre-cut for Raymarine AXIOM 12 f/9.5″ Wide Guard?
Is it cut or uncut?
How to mount or what is the mounting style of the NavPod SailPod Pre- Cut f/Raymarine AXIOM 12 f/9.5″ Wide Guard?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. Unique waterproof seal, build quality and attractive design make the best-built instrument casenever available for the maritime industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod SailPod Pre-Cut f/Raymarine AXIOM 12 f/9.5″ Wide Guard? Navigation at your fingertips. "In case of need...in case of need." Sail Pods are a smart solution for installing a radar or chart plotter at the helm station. You can... Is it cut or not? Cut How to mount or what is the mounting style of the NavPod SailPod Pre-Cut f/Raymarine AXIOM 12 f/9.5″ Wide Guard? Pedestal
Save $106 when you purchase the NavPod SailPod Pre-Cut f/Raymarine AXIOM 12 f/9.5″ Wide Guard for only $343from NVN Marine! Same day dispatch before 3 p.m. NavPod SailPod Pre-Cut f/Raymarine AXIOM 12 f/9.5″ Wide Guard Technical specifications
Type: | Boat Equipment | Display Media |
---|---|
Supplier: | NavPod |
Weight: | 5.1 lbs |
Cut/Uncut: | Couped |
Mounting Style: | Pedestal |
Shipping Weight: | 5.1 lbs |
---|---|
Box Sizes: | 8.00 (h) x 12.00 (w) x 17.00 (l) |
Cubic feet: | 1632.0 |
Returnable: | Yes |
For detailed shipping terms, please see our shipping policy and you can find our return and refund policyent here.
- Pre-cut NavPod SailPod for Raymarine Axiom 12 and Axiom+ 12 f/12″ Wide Guard (pre-cut for surface mounting using rear mounting brackets)
- Pre-cut NavPod SailPod for Garmin GPSMAP 942xs 942 922xs and 922 f/9.5″ Wide Guard
- Pre-cut NavPod SailPod for Garmin GPSMAP 923 923xsv 943 and 943xsv f/12″ Wide Guard
- Pre-Cut NavPod SailPod for Garmin GPSMAP 8416xsv/8616xsv f/9.5" Wide Guard
- Pre-cut NavPod SailPod for Garmin GPSMAP 8416xsv and 8616xsv f/12″ Wide Guard
- Pre-cut NavPod SailPod for Garmin GPSMAP 8412xsv and 8612xsv f/12″ Wide Guard
- Pre-Cut NavPod SailPod for Garmin GPSMAP 8410xsv/8610xsv f/9.5" Wide Guard