NavPod SailPod Pre-Cut f/Raymarine AXIOM 9 f/12″ Wide Guard Boat Outfitting

Pre-cut SailPod for Raymarine AXIOM 9 f/12″ Wide Guard

SailPods are intended for mounting a single radar or chart plotter at the helm. Navigation at your fingertips. "Where you need it…when you need it." Sail Pods are the smart solution for mounting your radar or chartplotter to the helm where you can easily operate it and clearly see small details on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Nickel-chrome plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. It is best to mount a SailPod on a single-bend AngleGuard or use a double-bend AngleGuard to mount an InstrumentPod on the supper vertical section and a SailPod below on the inclined section.

Structural Rigidity – The Gen3 improvements now include a thicker gauge acrylic coated AB S material which improves strength and offers better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal – All SailPods are manufactured with a double seal system providing excellent waterproofing. This seal offers the best protection for your marine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditionss. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-resistant nickel-chrome-plated stainless steel screws for added security and a bit of style!

Commitment to quality - We stand behinds our commitment by offering a 10-year warranty. on all new NavPods Gen3.

Navigation at your fingertips. "In case of need...in case of need." Sail Pods are a smart solution for installing a radar or chart plotter at the helm station. You can...
PRODUCT ID: 66833
SKU: NVN-66833
CSKU: CWR-66833
REWRITE: 77944-navpod-sailpod-pre-cut-f-raymarine-axiom-9 -f-12
Manufacturer Part Number: GP2050-16
UPC: 659988114591
ASIN: B07XLPZTBH
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod SailPod Pre-Cut f /Raymarine AXIOM 9 f/12" Wide Guard
NAME_EX: NAVPOD SAILPOD PRE-CUT FOR RAYMARINE AXIOM 9(+) FOR 12"
PTITLE: NavPod SailPod Pre-Cut f/Raymarine AXIOM 9 f/12" Wide Guard
TYPE: Boat Equipment | Display Mounts
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS

NavPod SailPod Pre-Cut f /Raymarine AXIOM 9 f/12 Wide Guard

Gtags:

GSpecs:

NavPod Pre-cut SailPod for Raymarine AXIOM 9 f/12″ Wide Guard Product description

Pre-cut SailPod for Raymarine AXIOM 9 f/12″ Wide Guard

SailPods are intended for mounting a single radar or chart plotter at the helm. Navigation at your fingertips. "Where you need it…when you need it." Sail Pods are the smart solution for mounting your radar or chartplotter to the helm where you can easily operate it and clearly see small details on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Nickel-chrome plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. It is best to mount a SailPod on a single bend AngleGuard ou use a dual-curvature AngleGuard to install an InstrumentPod on the top vertical section and a SailPod below on the inclined section.

Structural Rigidity – Gen3 improvements now include a Thicker gauge acrylic coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal – All SailPods are manufactured with a double seal system providing excellent waterproofing. This seal offers the best protection for your marine electronics. SailPods are designedto withstand the most difficult and wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poran Microcell polyurethane seal is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-proof nickel-chrome-plated stainless steel screws for added security and a bit of stylee!

Commitment to Quality - We back our commitment by offering a 10-year warranty. on all new NavPods Gen3.

Navigation at your fingertips. "In case of need...in case of need." Sail Pods are a smart solution for installing a radar or chart plotter at the helm station. You can...

Frequently asked questions (FAQ) about the NavPod SailPod Pre-Cut f/Raymarine AXIOM 9 f/12″ Wide Guard Who is the NavPod?
How to describe the NavPod SailPod Pre-Cut f/Raymarine AXIOM 9 f/12″ Wide Guard?
Is it cut or uncut?
How to mount or what is the style assembly instructions for the NavPod SailPod Pre-Cut f/Raymarine AXIOM 9 f/12″ Wide Guard?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique waterproof seal, quality build and attractive design make the best-built instrument case ever available for themaritime industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod SailPod Pre-Cut f/Raymarine AXIOM 9 f/12″ Wide Guard? Navigation at your fingertips. "In case of need...in case of need." Sail Pods are a smart solution for installing a radar or chart plotter at the helm station. You can... Is it cut or not? Cut How to mount or what is the mounting style of the NavPod SailPod Pre-Cut f/Raymarine AXIOM 9 f/12″ Wide Guard? Pedestal

Save $99 when you purchase the NavPod SailPod Pre-Cut f/Raymarine AXIOM 9 f/12″ Wide Guard for only $350from NVN Marine! Same day dispatch before 3 p.m. NavPod SailPod Pre-Cut f/Raymarine AXIOM 9 f/12″ Wide Guard Technical specifications

Type:	Boat equipment \| Display Media
Supplier:	NavPod
Cut/Uncut:	Cutted
Edit Style:	Pedestal

NavPod SailPod pre-cut for Raymarine AXIOM 9 f/12″ Wide Guard User reviewsNavPod SailPod pre-cut for Raymarine AXIOM 9 f/12″ Wide Expedition and Return Guard