NavPod SailPod Pre-Cut f/Raymarine AXIOM PRO 16 f/12″ Wide Guard Boat Outfitting

Pre-cut SailPod for Raymarine AXIOM PRO 16 for 12″ wide protection

SailPods are intended for mounting a single radar or chart plotter at the helm. Navigation at your fingertips… "Where you need it, when you need it. » SailPods are the smart solution for mounting your radar or chart plotter at the helm, where you can easily operate it and clearly see every minute detail on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Tamper-proof nickel chrome screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. It is best to mount a SailPod on a single-bend AngleGuard or on the angled section of a double-bend angle guard with an InstrumentPod mounted above on the right section.

Structural Rigidity – Gen3 improvements now include thicker support. Gauge acrylic coated ABS material improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SailPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include external silico sealno thicker with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware supplied with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Tamper-proof nickel-chrome-plated stainless steel screws provide security combined with a little style!

Commitment to quality – We stand behind our commitment by offering a 10-year warranty on all new NavPods Gen3.

PRODUCT ID: 92188
SKU:NVN-92188
CSKU: CWR-92188
REWRITE: 103299-navpod-sailpod-pre-cut-f-raymarine- axiom-pro-16
MPN: GP2920-01
UPC:
ASIN:
WSKU: NAVGP292001
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod SailPod Pre-cut for Raymarine AXIOM PRO 16 f/12 ″ Wide Guard
EX_NAME: NAVPOD SIALPOD PRE-CUT FOR RAYMARINE AXIOM PRO 16 FOR
PTITLE: NavPod SailPod Pre-Cut f/RaymarineAXIOM PRO 16 f/12″ Wide Guard
TYPE: Boat equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS

NavPod GP2920-01 SailPod for Raymarine Axiom Pro 16

Gtags:

GSpecs:

NavPod Pre-cut SailPod for Raymarine AXIOM PRO 16 f/12″ Wide Guard Product description

Pre-cut SailPod for Raymarine AXIOM PRO 16 for 12″ Wide Guard

SailPods allow you to mount a single radar or chartplotter at the helm. Navigation at your fingertips… "Where you need it, when you need it. » SailPods are the smart solution for mounting your radar or chart plotter at the helm, where you can easily operate it and clearly see every minute detail on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Tamper-proof nickel chrome screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. It is best to mount a SailPod on a Single Bend AngleGuard,or on the angled section of a Double Bend Angle Guard with an InstrumentPod mounted above on the straight section.

Structural Rigidity – Gen3 enhancements now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SailPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditionss. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "compression" like many rubber compounds. This is an important consideration when you need to open the SailPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Nickel-Chrome Plated Stainless Steel Tamper Proof Screws provide security combined with a little style!

Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new products.ux NavPods Gen3.

Frequently asked questions (FAQ) about the NavPod SailPod Pre-Cut f/Raymarine AXIOM PRO 16 f/12″ Wide Guard Who is the NavPod?
How to describe the NavPod SailPod Pre-Cut f/Raymarine AXIOM PRO 16 f/12″ Wide Guard?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod SailPod Pre-Cut f/Raymarine AXIOM PRO 16 f/12″ Wide Guard? "

NAVGP292001 SailPod

Model: GP2920-01

Pre-cut SailPod for Raymarine AXIOM PRO 16 for 12? wide protection

SailPodsallow a single radar or chart plotter to be mounted at the helm. Navigation at your fingertips "Where you need it? When you need it." Bar chartplotter where you can easily operate and clearly see the fine details of the screen. The NavPod have a high gloss finish, giving you a clean mounting solution while hiding unsightly chrome wires. The amperproof screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, the NavPod protects your electronic devices from the harshest and wettest offshore sailing conditions. It is best to mount a SailPod on a single curvature AngleGuard or use a double curvature AngleGuard to mount an InstrumentPod on the top vertical section and a SailPod below on the inclined section.

Structural rigidity – Gen3 improvements now include thicker support. Material ABScoated with gauge acrylic which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal — All SailPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to"compression" like many rubber compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The gasket will continue to do its job.

Chrome Nickel Plated Stainless Steel — We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional NavPod series. For the NavPod Gen3, we provide tamper-resistant, nickel-chrome-plated stainless steel screws for added security combined with a bit of style!

Commitment to quality We stand by our commitment by offering a 10-year warranty on all new NavPod Gen3.

"

Save $127 when you purchase the NavPod SailPod Pre-Cut f/Raymarine AXIOM PRO 16 f/12″ Wide Guard for only $412 at NVN Marine! Same day dispatch before 3 p.m. NavPod SailPod Pre-Cut f/Raymarine AXIOM PRO 16 f/12″ Wide Guard Technical Specifications

Type:	Boat Equipment \| Display Stands
Seller:	NavPod

NavPod SailPod pre-cut for Raymarine AXIOM PRO 16 f/12″ Wide Guard User reviewsNavPod SailPod pre-cut for Raymarine AXIOM PRO 16 f/12″ Wide Guard Shipping and Return

For more details shipping policy, please review our shipping policy and you can find our return and refund policy here.