Jabsco Impeller Kit - 9 Blades - Nitrile - 3-3/4" Diameter x 3-1/2" Width 1" Shaft Diameter Marine Plumbing & Ventilation

Impeller kit - 9 blades - Nitrile - 3-3/4" diameter x 3-1/2" width, 1" shaft diameter

Features:

Material: Nitrile
Drive type: Spline drive
Number of blades: 9
Dimensions: Diameter: 3-3/4", Shaft Diameter: 1", Shaft Width: 3-1/2"

Jabsco flexible impellers can be installed on most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
Jabsco flexible impellers are undergo rigorous quality processes to ensure reliable, efficient and long-lasting performance.

Replace all wheels at least once a year, or sooner, depending on function of the engine. When installed correctly, a wheel can last for several years, but it is always advisable to follow a preventive maintenance programrather than corrective.

Replacing the impellers is easy. By removing the end cover screws it is possible to remove the impeller using eiThen use a Jabsco impeller removal tool or channel lock pliers to grip the impeller hub. Do not use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

Always have spare impellers on board in emergency case.The turbine is one of the most essential components of the engine cooling system and should always be treated as such.

Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly, it gives extra protection to the impeller when initial priming. After replacing the gasket and end cover, the pump is ready for use.ploi.

WARNING: This product can expose you to chemicals, including LEAD, known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings.ca.gov.

NeOprene is the most commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present. Acrylic impeller is used for bilge pumping and is. used for...
PRODUCT ID: 50252
SKU: NVN-50252
CSKU: CWR-50252
REWRITE: 61363-jabsco-impeller-kit-9 -blade
MPN: 6760 -0003-P
UPC: 671880591881
ASIN: B003E1XO8W
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU: 6-67600003P
NAME: Jabsco Impeller Kit - 9 Blades - Nitrile - 3-3/4" Diameter x 3-1/2" Widthe, 1" shaft diameter
NAME_EX: JABSCO NITRILE 9 BLADES TURBINE KIT 3 3/4 DIA /4" diameter x 3-1/2" width, 1" shaft diameter
TYPE: Marine Plumbing & Ventilation | Turbines
SELLER: Jabsco
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS and ACCESSORIES
Sports
Jabsco 6760-0003-P Turbine Kit nitrile
Jabsco Impeller Kit - 9 Blades - Nitrile - 3-3/4" Diameter x 3-1/2" W, 1" Shaft Diameter
Sports
Gtags:

Jabsco

GSpecs:

Jabsco Impeller Kit - 9 Blades - Nitrile - 3-3/4" Diameter x 3-1/2" Width, 1" Shaft Diameter Product Description Impeller Kit - 9 Blades - Nitrile - 3-3/4" diameter x 3-1/2" wide, 1" shaft diameter

Features:

Material: Nitrile
Drive type: Spline drive
Number of blades: 9
Dimensions: Diameter: 3-3/4", Shaft Diameter: 1", Shaft Width: 3-1/2"

Jabsco flexible impellers can be Installed on most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps. Jabsco flexible impellers undergo rigorous quality processes to ensure reliable performance , efficient and durable.

Replace all turbines at least once a year, or sooner, depending on the engine. When installed correctly, a t.urbine can last several years, but it is always advisable to follow a preventive rather than corrective maintenance schedule.

Replacing the turbines is easy. By removing the screws from the cover of the turbine end, it is possible to remove the impeller using either a Jabsco impeller removal tool or channel lock pliers to grip the impeller hub. . Do not use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

Always have spare impellers on board in emergency case.The turbine is one of the most essential components of the engine cooling system and should always be treated as such.

Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly, it gives extra protection to the roue during initial booting. After replacing the seal and end cover, the pump is ready for use.

This product can expose you to chemicals, including LEAD, which are recognized by the State of California to cause cancer, birth defects or other reproductive harm. For more information,

Neoprene is the most commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present. The Acrylic Impeller is used for bilge pumping and is used for...

Frequently Asked Questions (FAQ) about Jabsco Impeller Kit - 9 Blades - Nitrile - 3-3/4 " Dia x 3-1/2" W, 1" Shaft Diameter Who is Jabsco? How to Describe Jabsco Impeller Kit - 9 Blades - Nitrile - 3-3/4" Dia x 3-1/2" wide, 1" shaft diameter? What is the product type?
Who is Jabsco? Jabsco is a leading global manufacturer of products for the recreational marine market, including water systems, engine cooling pumps, floodlights and marine waste systems. Wherever a pump is needed on board a pleasure boat or small work boat, for engine cooling, bilge pumping, fresh or waste water treatment, Jabsco worldwide will provide top quality product. How to DescribeJabsco ibe Impeller Kit – 9 Blades – Nitrile – 3-3/4" Diameter x 3-1/2" Width, 1" Shaft Diameter? Neoprene is the most commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present The acrylic impeller is used for bilge pumping and is used for...What is the product type b> when you purchase the Jabsco turbine kit - 9 blades - Nitrile - 3-3/4" diameter x 3-1/2" width, 1" shaft diameterfor only $169b> from NVN Marine! Ships on same day before 3 p.m. Jabsco Impeller Kit - 9 blades - Nitrile - 3-3/4" diameter x 3-1/2" width, 1" shaft diameter Technical specifications

Type:	Marine plumbing and ventilation \| Turbines
Supplier:	Jabsco
Weight:	1.3 lbs
Product Manual:	Download PDF

Jabsco Impeller Kit - 9 Blades - Nitrile - 3-3/4" Diameter x 3-1/2" Width, 1 " Shaft Diameter User ReviewsJabsco Impeller Kit - 9 Blades - Nitrile - 3-3/4" Diameter x 3-1/2" Wide, 1" Shaft Diameter Shipping & Returns

Shipping Weight:	1.3 lbs
Box Sizes:	4.00 (h) x 6.00 (w)x 10.00 (l)
Cubic feet:	240.0
Returnable:	Yes
P65:	Yes