NAVPOD RMX4600-13 Rail Mount for Furuno GP1971F 9 GPS Marine Navigation & Instruments
NAVPOD RMX4600-13 Railmount
Model: RMX4600-13- Pre-cut RailMount for Furuno GP1971F 9? Multi-touch GPS / Chartplotter / Fish Finder (fits 1? or 1.25? tubes)
RailMount NavPods are best used for mounting a control autopilot, a navigation instrument or a small chart plotter on an existing base. guard. Fits any 1" or 1.25" diameter tube. A chrome nickel plated stainless steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing when sitting under the vehicle on a rainy day. All wiring runs from the NavPod down the center of the stainless steel arm and into the base shield. This application provides a clean, sturdy installation for electronics without replacing the base guard.
Rail mounts are designed for any size instrumente popular standard as well as 7- and 9-inch chartplotters.
Structural Rigidity — Gen3 enhancements now include thicker acrylic-coated ABS material that improves strength and provides better structural rigidity . This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof seal — All RailMount NavPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a joiThicker silicone outer nt with improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices. The seal will continue to do its job.
Chrome-Nickel Plated Stainless Steel — We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Tamper-proof nickel-chrome-plated stainless steel screws provide security combined with a bit of style!
1
NAVPOD RMX4600-13 Rail Mount for Furuno GP1971F 9 GPS Product DescriptionNAVPOD RMX4600-13 Rail Mount
Model: RMX4600-13- Pre-cut rail support For Furuno GP1971F 9? Multi-touch GPS / Chartplotter / Fish Finder (fits 1? or 1.25? tubes)
RailMount NavPods are best used for mounting a control autopilot, a navigation instrument or a small chart plotter on an existing base. guard. Fits any 1" or 1.25" diameter tube. A chrome nickel plated stainless steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing when sitting under the vehicle on a rainy day. All wiring runs from the NavPod down the center of the stainless steel arm and into the base shield. This application provides a clean and robust installation for electronics, without replacement of thehas base protection.
Rail mounts are designed for all popular standard size instruments as well as 7 and 9 inch chart plotters.
Structural Rigidity — L 'enh Gen3's improvements now include thicker gauge acrylic-coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof seal — All RailMount NavPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. NavPods are designed towithstand the most difficult and wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices. The gasket will continue to do its job.
Nickel and Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Tamper-proof nickel-chrome-plated stainless steel screws provide security combined with a little style!
1
Save 355 $ when you purchase the NAVPOD RMX4600-13 Railmount for Furuno GP1971F 9 GPS for only $214 at NVN Marine! Same day dispatch before 3 p.m. NAVPOD RMX4600-13 Furuno GPS Rail Mount GP1971F 9 Technical Specifications
| Type: | Marine Navigation & Instruments | Instruments |
|---|---|
| Supplier: | NavPod |
For detailed shipping policy, please see our shipping policy and you can find you our returns and refund policy here.
- NAVPOD RMX4600-08 Rail Mount for Lowrance HDS-9 Gen2
- NavPod RMX4600-04 RailMount Pre-Cut f/Simrad NSS9 evo2/B&G Zeus2 9
- Uncut NavPod RMX4600 RailMount (Usable Face = 11.375"L x 6.75"H) (28.9cm W x 17.1cm H)
- NavPod RMX4502 RailMount Pod 2 3.6" pre-cut holes
- NavPod RMX4500-08 Pre-Cut RailMount for Garmin 922 / 922xs / 942 / 942xs
- NavPod RMX4500-02 Pre-Cut RailMount for Raymarine eS75/eS77/eS78
- NavPod RMX4500-01 Pre-Cut RailMount for Garmin echoMAP Series 7"
