NavPod RMX4800 RailMount Uncut Boat Outfitting

RMX4800 RailMount uncut

USABLE FACE: 11.125" W x 8" H
MAX CUTOUT: 7.125" H x 10.25" W

NavPods RailMount are best used for mounting an autopilot control, navigation instrument or small chartplotter to an existing base guard. Fits any 1" or 1.25" diameter tube. A chrome-plated stainless steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing when sitting under the vehicle on a rainy day. All cables run from the NavPod down the center of the stainless steel arm and into the cradle guard. This application allows for a clean, robust installation for electronics, without replacing the base guard.

All RailMount NavPods include:

Acrylic capped ABS plastic
Chrome-plated stainless steel tamper-proof fixings
Double seal for waterproof integrity
Models are available pre-cut for popular electronic devices.
Chrome-plated stainless steel arm with swivel mount
Two sets of adapters included for 1" or 1.25" diameter tubes

High gloss material

NavPods are made with custom co-extruded ABS material with an acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The waterproof seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed towithstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to maintain your electronic devices.

Nickel plated chrome screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large capacity thermoforminglibre is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. We've redesigned and revamped all the popular NavPods. We have reviewed all form products and selected the best design elements from each and incorporated them into each new Gen3 product.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a brilliant finish.te and durable. We will honor our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

RailMount NavPods are best suited for installing autopilots, navigation instruments or small chart plotters on existing systems. basic guards. Can be installed on any pipe with a diameter of 1 or 1.25. Chrome-plated stainless steel arms are used to install the NavPod. The NavPod can rotate 180 degrees for easy viewing when sitting under the vehicle on a rainy day. All wiring runs from the NavPod through the center of the stainless steel arm and then out to the base shield. This application can provide a clean and sturdy installation of electronic devices without the need to replace the base cover.
PRODUCT ID: 59232
SKU: NVN-59232
CSKU: CWR-59232
REWRITE: 70343-navpod-rmx4800-railmount-uncut
MPN:RMX4800
UPC: 659988107203
br> ASIN: B00YAZLTNI
WSKU: NAVRMX4800
SSKU:
KSKU: NPDRMX4800
GSKU:
MSKU:
LSKU:
NAME: NavPod RMX4800 RailMount Uncut
NAME_EX: NAVPOD RMX4800 RAIMount UN-CUT, USABLE FACE
PTITRE: NavPod RMX4800 RailMount Uncut
TYPE: Boat fitting | Display Mounts
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod RMX4800 Rail Mount Uncut

Gtags:

GSpecs:

NavPod RMX4800 Uncut RailMount Product Description RMX4800 Uncut RailMount

USABLE FACE: 11.125" W x 8" H
Maximum Cutout: 7.125" H x 10.25" W

RailMount NavPods are best used for mounting an autopilot control, navigation instrument or small chartplotter to an existing protective cradle. Fits any 1" or 1.25" diameter tube. A chrome-plated stainless steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing when sitting under the vehicle on a rainy day. All cables run from the NavPod down the center of the stainless steel arm and into the cradle guard. This application allows for a clean, robust installation for electronics, without replacing the base guard.

All RailMount NavPods include:

Acrylic capped ABS plastic
Chrome-plated stainless steel tamper-resistant fasteners
Double-sealed for waterproof integrity
Templates are available pre-cut for popular electronic devices.
Med Stainless Steel Chrobras with Swivel Bracket
Two sets of adapters included for 1" or 1.25" diameter tubing

The Hi- Glossy Material

NavPods are made with a custom co-extruded acrylic coated ABS material. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The waterproof seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of youre marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3, we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. We've redesigned and revamped all the popular NavPods. We looked at all the old products and selected the best design elements from each and incorporated them into each new Gen3 product.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident that you will benefit from years oftrouble-free service and a shiny, durable finish. We will honor our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

RailMount NavPods are best suited for installing autopilots, navigation instruments or small chart plotters on existing systems. basic guards. Can be installed on any pipe with a diameter of 1 or 1.25. Chrome-plated stainless steel arms are used to install the NavPod. The NavPod can rotate 180 degrees for easy viewing when sitting under the vehicle on a rainy day. All wiring runs from the NavPod through the center of the stainless steel rm and then into the base shield. This application can provide a clean and robust installation of electronic devices without the need to replace the base cover.

Frequently asked questions (FAQ) about NavPod RMX4800 RailMount Uncut Who is the NavPod?
How to describe the NavPod RMX4800 RailMount Uncut?
Is it cut or uncut?
How to mount or what is the mounting style of the NavPod RMX4800 RailMount uncut?
What is the usable surface area of the product?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod RMX4800 RailMount Uncut? RailMount NavPLes OD are most suitable for installing autopilots, navigation instruments or small chartplotters on ex base guardsistants. Can be installed on any pipe with a diameter of 1 or 1.25. Chrome-plated stainless steel arms are used to install the NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the vehicle on a rainy day. All wiring extends from the NavPod down the center of the stainless steel arm, then out to the base shield. This application can provide a clean and robust installation of electronic devices without the need to replace the base cover. Is it cut or uncut? UncutHow to mount or what is the mounting style of the NavPod RMX4800 RailMount Uncut? RailWhat is the size of the usable surface area of the product? 11.125"L x 8"H

Save $107 when you purchase the NavPod RMX4800 RailMount Uncut for only $472 at NVN Marine! Same day dispatch before 3 p.m. NavPod RMX4800 RailMount Technical Supportas uncutspecifications

Type:	Boat equipment \| Display Media
Supplier:	NavPod
Cut/Uncut:	Uncut
Edit Style:	Rail
Usable side:	11.125"W x 8"H

NavPod RMX4800 RailMount Uncut User ReviewsNavPod RMX4800 RailMount Uncut Shipping & Return

For detailed shipping policy, please see our shipping policy and you can find our policy returns and refunds here.