Pre-cut NavPod SailPod for Simrad GO12 XSE GO12 XSR and B&G Vulcan 12R f/12″ Wide Guard

Pre-cut NavPod SailPod for Simrad GO12 XSE GO12 XSR and B&G Vulcan 12R f/12″ Wide Guard Boat Outfitting

Pre-cut SailPod for Simrad GO12 XSE, GO12 helm-level chartplotter. Navigation at your fingertips… "Where you need it, when you need it." SailPods are the smart solution for mounting your radar or chartplotter at the helm, wherever you are. You can easily use it and clearly see even the smallest details of the screen. The NavPods have a high gloss finish, giving you a clean mounting solution while hiding unsightly wires. The tamper-proof nickel chrome screws provide a bit of bling and. plenty of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest, wettest offshore sailing conditions. a corner guarddual-curved with an InstrumentPod mounted above on the straight section.

Structural Rigidity – Gen3 improvements now include a thicker stand. acrylic gauge applied ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SailPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements includet a thicker silicone outer seal with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SailPod in the future in order to see repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Tamper-proof nickel-chrome-plated stainless steel screws provide security combined with a little style!

Commitment to quality – We stand behind our commitment by offering a 10-year warranty on all new NavPods Gen3.

SailPods allow a single radar or chart plotter to be mounted at the helm. Navigation at your fingertips… "Where you need it, when you need it. » SailPods are the smart solution for mounting your radar or chart plotter at the helm, where you can easily operate it and clearly see every minute detail on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Tamper-proof nickel chrome screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. A SailPod is best mountedon a Single Bend AngleGuard, or on the angled section of a Double Bend Angle Guard with a moUnted InstrumentPod above on the straight section.

Structural Rigidity – Gen3 enhancements now include ABS material coated with Thicker gauge acrylic that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SailPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SailPods are designed to withstand off-shore sailing conditionsmost difficult and humid hore. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane seal is now 50% thicker and is not subject to "compression adjustment" like many rubber compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Nickel-Chrome Plated Stainless Steel Tamper Proof Screws provide security combined with a little style!

Commitment to Quality – We honor our commitment by offering10-year warranty on all new Gen3 NavPods. Simrad GO12 XSE, GO12 Guard?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod SailPod Pre-Cut f/Simrad GO12 XSE, GO12 XSR & B&G Vulcan 12R f/12″ Wide guard? "

NAVGP205026 SailPod

SailPods allow a single radar or chart plotter to be mounted at the helm. Navigation at your fingertips "Where you need it? When you need it." your radar or chartplotter to the helm where you can easily operate and clearly see the fine details of the screen. The NavPod have a high gloss finish, giving you a clean mounting solution while hiding unsightly wires. Nickel-chrome plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, the NavPod protects your electronic devices from the harshest and wettest offshore sailing conditions. It is best to mount a SailPod on a single-bend AngleGuard or use a double-bend AngleGuard to mount an InstrumentPod on the upper vertical section et a SailPod underneath on the angled section.

Structural Rigidity – Gen3 improvements now include thicker support. Gauge acrylic coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal — All SailPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include an external sealn thicker silicone with improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The gasket will continue to do its job.

Chrome Nickel Plated Stainless Steel — We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our Traditional NavPod Series . For the NavPod Gen3, we provide tamper-resistant, nickel-chrome-plated stainless steel screws for added security combined with a little style!

Commitment to Quality We stand behind our commitment by offering a 10 year warranty. warranty on everythings the new NavPod Gen3.

• NavPod SailPod Pre-Cut f/Raymarine AXIOM PRO 16 f/12″ Wide Guard
• NavPod SailPod Pre-Cut f/Raymarine AXIOM 9 f/12″ Wide Guard
• NavPod SailPod Pre-Cut f/Raymarine AXIOM 12 f/9.5″ Wide Guard
• Pre-cut NavPod SailPod for Raymarine Axiom 12 and Axiom+ 12 f/12″ Wide Guard (pre-cut for surface mounting using rear mounting brackets)
• Pre-cut NavPod SailPod for Garmin GPSMAP 942xs 942 922xs and 922 f/9.5″ Wide Guard
• Pre-cut NavPod SailPod for Garmin GPSMAP 923 923xsv 943 and 943xsv f/12″ Wide Guard
• Pre-Cut NavPod SailPod for Garmin GPSMAP 8416xsv/8616xsv f/9.5" Wide Guard