NavPod SailPod Precut f/Raymarine Axiom PRO 16 f/9.5" Wide Guard Boat Outfitting

Pre-cut SailPod for Raymarine Axiom PRO 16 for 9.5" wide protection

SailPods allow mounting of a single radar or chartplotter to the rod. Navigation at your fingertips… "Where you need it, when you need it. » SailPods are the smart solution for mounting your radar or chartplotter to the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a glossy finish, giving you a clean mounting solution while hiding unsightly wires. Tamper-resistant plated screws provide a little bling and a lot of security. Designed with a double-sealed waterproof seal, NavPods protect your electronic devices from the harshest offshore sailing conditions. It is best to mount a SailPod on a single bend AngleGuard or the. inclined section of a double curvature corner guard with an InstrumentPod monted above on the straight section.

Structural Rigidity – Gen3 enhancements now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SailPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer seal withc an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware supplied with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Tamper-proof nickel-chrome-plated stainless steel screws provide security combined with a little style!

Commitment to quality – We stand behind our commitment by offering a 10-year warranty on all new NavPods Gen3.

NAVGP19201 SailPod model: GP1920-01 TheIs SailPod used for precutting Raymarine AXIOM PRO 16 for 9.5? The large protective veil is used to mount a single radar or chartplotter on the helmet. ...
PRODUCT ID: 83676
SKU: NVN-83676
CSKU: CWR-83676
REWRITE: 94787-navpod-sailpod-precut-f-raymarine-axiom-pro-16
MPN: GP1920-01
UPC:
ASIN:
WSKU: NAVGP192001
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod SailPod Precut f/Raymarine Axiom PRO 16 f/9.5" Wide Guard
NAME_EX: NAVPOD SAILPOD PRECUT FOR RAYMARINE AXIOM PRO 16 FOR
PTITLE: NavPod SailPod Precut f/Raymarine Axiom PRO 16 f/9.5" Wide Guard
TYPE: Boat Equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod SailPod Precut for Raymarine Axiom PRO 16 for 9.5" Wide Guard - GP1920-01

Gtags:

Boat

GSpecs:

NavPod SailPod Precut f/Raymarine Axiom PRO 16 f/9.5" Wide Guard Product description

SailPod Precut for Raymarine Axiom PRO 16 for 9.5" Wide Guard

SailPods are intended for mounting a single radar or chartplotter at the helm. Navigation at your fingertips… "Where and when you need it. » SailPods are the smart solution for mounting your radar or chart plotter at the helm, where you can easily operate it and clearly see every minute detail on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Tamper-proof nickel chrome screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. It is best to mount a SailPod on a Single Bend AngleGuard, or on the i sectionnclined with a Double Bend Angle Guard with an InstrumentPod mounted above on the straight section.

StructuActual Rigidity – Gen3 improvements now include thicker gauge acrylic coated ABS material which improves strength and offers better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SailPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditions. The improvementsns Gen3 include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is useless when you need to open the SailPod in the future to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Tamper-resistant nickel-chrome-plated stainless steel screws provide security combined with a little style!

Commitment to quality – We stand behind our commitment by offering a 10-year warranty on all new NavPods Gen3.

NAVGP19201 SailPod Model: GP1920-01 Is the SailPod used for precutting the Raymarine AXIOM PRO 16 for 9.5? The large protective veil is used to mount a single radar or chartplotter on the helmet. ...

Frequently asked questions (FAQ) about the NavPod SailPod Precut f/Raymarine Axiom PRO 16 f/9.5" Wide Guard Who is the NavPod?
How to describe the NavPod SailPod Precut f /Raymarine Axiom PRO 16 f/9.5" Wide Guard?
Who is the NavPod? The Navpod is a better way to mount your fishfinder, radar or GPS unit. The unique waterproof seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. .How to describe the NavPod SailPod Precut f/Raymarine Axiom PRO 16 f/9.5" Wide Guard? Model NAVGP19201 SailPod: GP1920-01 Is the SailPod used for pre-cutting the Raymarine AXIOM PRO 16 for 9.5? The wide guard sail is used to mount a single radar or chartplotter on the helmet ...

Save $127 when you purchase the NavPod SailPod Precut f/Raymarine Axiom PRO 16 f/9.5. " Wide Guard for only $412 from NVN Marine Same day shipping before !ore at 3 p.m. NavPod SailPod Precut f/Raymarine Axiom PRO 16 f/9.5" Wide Guard Technical Specifications

Type:	Boat Equipment \| Mounts display
Provider:	NavPod

NavPod SailPod Precut f/Raymarine Axiom PRO 16 f/9.5" Wide Guard User ReviewsNavPod SailPod Precut f/Raymarine Axiom PRO 16 f/9.5" Wide Guard Shipping & Returns

For shipping policy detailed, please consultr our shipping policy and you can find our returns and refund policy here.