Pre-cut NavPod SailPod f/Simrad NSS12 evo3/B&G Zeus3 12 f/12″ Wide Guard Boat Outfitting

Pre-cut SailPod for Simrad NSS12 evo3/B & G Zeus3 12 for 12″ Wide Guard

SailPods are intended for mounting a single radar or chartplotter to the bar. Navigation at your fingertips… "Where and when you need it. » SailPods are the smart solution for mounting your radar or chart plotter at the helm, where you can easily operate it and clearly see every minute detail on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Tamper-proof nickel chrome screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. It is best to mount a SailPod on a Single Bend AngleGuard or on the angled section of a Double Bend Angle Guard with an InstrumentPod mounted above on thea straight section.

Structural Rigidity – Gen3 improvements now include thicker gauge AC acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal– All SailPods are manufactured with a double seal system providing a excellent sealing. This seal offers the best protection for your marine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include external silicone sealthicker with improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The gasket will continue to do its job.

Nickel-Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Chrome Nickel Plated Stainless Steel Tamper Proof Screws offer security combined with a bit of style!

Commitment to Quality – We stand behind our commitment by offering a 10 year warranty on all new NavPods Gen3.

SailPod pre-cuts for Simrad NSS12 evo3/B and G Zeus3 12, for 12'' wide SailPods protective cover for mounting a single radar or chartplotter on the helmet . Navigation at your fingertips...
PRODUCT ID: 79867
SKU: NVN-79867
CSKU: CWR-79867
REWRITE: 90978-navpod-sailpod-pre-cut-f-simrad -nss12 -evo3-b-g-zeus3
MPN: GP2200-14
UPC: 659988114027
ASIN: B07RBNFQ7V
WSKU: NAVGP220014
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod SailPod Pre-Cut f/ Simrad NSS12 evo3/B&G Zeus3 12 f/12″ Wide Guard
NAME_EX: NAVPOD SAILPOD PRE-CUT FOR SIMRAD NSS12 EVO3 / B&G ZEUS3
PTITLE: NavPod SailPod Pre-Cut f/Simrad NSS12 evo3/B&G Zeus3 12 f /12″ Wide Guard
TYPE: Boat Equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS

NavPod GP2200-14 Pre-Cut SailPod for Simrad NSS12 evo3 / B&G Zeus3 12 for 12"large Guard
Gp2200-14 Navpod Sailpod Pre-Cut F/Simrad Nss12 Evo3/Bg Zeus3 12 F/12,

Gtags:

Boat

GSpecs:

NavPod SailPod pre-cut for Simrad NSS12 evo3/B&G Zeus3 12 f/12″ Wide Guard Product description

SailPod pre-cut for Simrad NSS12 evo3/B & G Zeus3 12 for 12″ Wide Guard

SailPods allow you to mount a single radar or chart plotter at the helm. Navigation at your fingertips… "Where and when you need it. » SailPods are the smart solution for mounting your radar or chart plotter at the helm, where you can easily operate it and clearly see every minute detail on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Tamper-proof nickel chrome screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. A SailPod is best mounted on a Single Bend AngleGuard, or on the dryslanted installation of a Double Bend Angle Guard with an InstrumentPod mounted above in the right section. Thicker gauge acrylic that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal– All SailPods are manufactured with a double seal system providing a excellent sealing. This seal offers the best protection for your marine electronics. SailPods are designed to withstand the harshest offshore sailing conditions.more difficult and humid. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane seal is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The gasket will continue to do its job.

Nickel-Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Tamper-proof nickel-chrome-plated stainless steel screws provide security combined with a little style!

Commitment to quality – We stand by our ecommitment by offering a 10-year warranty on all new NavPods Gen3.

SailPod pre-cuts for Simrad NSS12 evo3/B and G Zeus3 12, for 12'' wide SailPods protective cover for mounting a single radar or chartplotter on the helmet. Navigation at your fingertips...

Frequently Asked Questions (FAQ) about NavPod SailPod Pre-Cut f/Simrad NSS12 evo3/B&G Zeus3 12 f/12″ Wide Guard Who is the NavPod?
How to describe the NavPod SailPod Pre-Cut f/Simrad NSS12 evo3/B&G Zeus3 12 f/12″ Wide Guard?
Is it cut or uncut ?
How to mount or what is the mounting style of the NavPod SailPod Pre-Cut f/Simrad NSS12 evo3/B&G Zeus3 12 f/12″ Wide Guard?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique waterproof seal, quality build, and attractive design make the best-built instrument case ever available to the m industry.aritime. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod SailPod Pre-Cut f/Simrad NSS12 evo3/B&G Zeus3 12 f/12″ Wide Guard? SailPod pre-cuts for Simrad NSS12 evo3/B and G Zeus3 12, for 12'' larger SailPods protective handle to mount a single radar or chartplotter on the helmet. Navigation at your fingertips...Is it cut or not? Cut How to mount or what is the mounting style of NavPod SailPod Pre-Cut f/Simrad NSS12 evo3/B&G Zeus3 12 f/12″ Wide Guard? Pedestal

Save $118 when you purchase the NavPod SailPod Pre-Cut f/Simrad NSS12 evo3/B&G Zeus3 12 f/12″ Wide Guard for only $381 from NVN Marine! Same day dispatch before 3 p.m. NavPod SailPod Pre-Cut f/Simrad NSS12 evo3/B&G Zeus3 12 f/12″ Wide Guard Specificationstechnical ons

Type:	Boat equipment \| Display Media
Supplier:	NavPod
Weight:	5.6 lbs
Mounting Style:	Pedestal
Cut/Uncut:	Cut

NavPod SailPod Pre-Cut f/Simrad NSS12 evo3/B&G Zeus3 12 f/12″ Wide Guard User ReviewsNavPod SailPod Pre-Cut f/Simrad NSS12 evo3/B&G Zeus3 12 f/12″ Wide Guard Shipping and return

Shipping weight:	5.6 lbs
Box sizes:	8.00 (h) x 11.00 (w) x 17.00 (w)
Cubic feet:	1496.0
Returnable:	Yes

For detailed shipping terms, please see our shipping policy and you can find our poreturn and refund policy here.