Pre-cut NavPod SailPod for Simrad NSS12 evo³ and B&G Zeus³ 12 f/9.5" Wide Guard Boat Outfitting

Pre-cut SailPod for Simrad NSS12 evo³ and B&G Zeus³ 12 for 9.5" wide protection

SailPods allow mounting of a single radar or chartplotter at the helm . Navigation at your fingertips. "Where you need it…when you need it". Sail Pods are the smart solution for mounting your radar or chartplotter at the helm, where you can easily locate it. 'use and clearly see every detail of the display, giving you a clean mounting solution while hiding unsightly wires. The tamper-proof nickel-plated screws provide a little bling and a lot of security. double-jointed, NavPods protect your electronic devices from the harshest offshore sailing conditions. It is best to mount the SailPod on a single-curvature AngleGuard or use a double-curvature AngleGuard to install an InstrumentPod on the vertic section.upper ale and a SailPod below on the sloping section.

Structural Rigidity – The Gen3 improvements now include a thicker gaugeAcrylic-coated ABS material that improves strength and provides a better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal – All SailPods are manufactured with a double seal system providing excellent waterproofing. This seal offers the best protection for your marine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditions. The improvementsGen3 ions include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPod Gen3, we provide tamper-proof nickel-chrome-plated stainless steel screws for added security combined with a little style!

Commitment to quality
We stand behindour commitment by offering a 10-year warranty on all new Gen3 NavPods.

Boat
Automobile

GSpecs:

NavPod Pre-cut SailPod for Simrad NSS12 evo³ and B&G Zeus³ 12 f/9.5" Wide Guard Product description

Pre-cut SailPod for Simrad NSS12 evo³ and B&G Zeus³ 12 for 9.5" Wide Guard

SailPods allow you to mount a single radar or chart plotter at the helm. Navigation at your fingertips. "Where you need it…when you need it." Sail Pods are the smart solution for mounting your radar or chartplotter to the helm where you can easily operate it and clearly see small details on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Nickel-chrome plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. It is best to mount a SailPod sUse a single-curvature AngleGuard or use a dual-curvature AngleGuard to install an InstrumentPod on the upper vertical section and SailP.od below on the inclined section.

Structural Rigidity – Gen3 improvements now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal – All SailPods are manufactured with a double seal system providing excellent waterproofing. This seal offers the best protection for your electronicse navy. SailPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poran Microcell polyurethane seal is now 50% thicker and is not subject to "retentive compression" like many rubber compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPod Gen3, we provide tamper-resistant nickel-plated stainless steel screws-chrome plated for added safety combined with a bit of style!

Commitment to quality
We back our commitment by offering a 10-year warranty on all new NavPods Gen3.

Pre-cut SailPods for Simrad NSS12evo"³ and B&GZeus"³12, suitable for 9.5" wide shield SailPods for mounting a single radar or chartplotter on the helmet . Fingertip navigation. "When necessary…if necessary." Sail Pods are a smart solution that installs a radar or chartplotter on the helm. You can easily operate and see the screen details clearly.

Frequently asked questions (FAQ) about the NavPod SailPod Pre-Cut f/Simrad NSS12 evo³ and B&G Zeus³ 12 f/9.5" Wide Guard Who is the NavPod?
How to describe the NavPod SailPod Pre-Cut f/Simrad NSS12 evo³ & B&G Zeus³ 12 f/9.5" Wide Guard?
Is it cut or uncut?
How to mount or what is ite NavPod mounting style SailPod Pre-Cut f/Simrad NSS12 evo³ & B&G Zeus³ 12 f /9.5" Wide Guard?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS The unique waterproof seal, build quality and attractive design make the best-built instrument case ever available to the marine industry. Features of all Navpods include waterproof silicone seal and tamper-evident clips for security. .Ty and convenience, concealed wiring and clean installation for easy access How to describe NavPod SailPod Pre-Cut f/Simrad NSS12 evo³ & B&G Zeus³ 12 f/9.5" Wide Guard? Pre-cut SailPods for Simrad NSS12evo"³ and B&GZeus"³12, suitable for 9.5 inch wide shield SailPods to mount a single radar or chartplotter on the helmet. "In case of need...in case of need." Sail Pods are a smart solution that installs a radar or chartplotter on the helm. can make it easiersmoothly operate and see the screen details clearly.Is it cut or uncutHow to mount or what is the mounting style of NavPod SailPod Pre-Cut f/Simrad NSS12 evo³ & B&G Zeus³ 12 Wide Guard f/9.5"? Pedestal

Save $110 when you purchase the NavPod SailPod Pre-Cut f/Simrad NSS12 evo³ and B&G Zeus³ 12 f/9.5" Wide Guardfor only $389 at NVN Marine! Same day dispatch before 3:00 p.m.ut f/Simrad NSS12 evo³ & B&G Zeus³ 12 f/9.5" Wide Guard Technical specifications

Type:	Boat Equipment \| Display Mounts
Supplier:	NavPod
Weight:	5.8 lbs
Cut/Uncut:	Couped
Mounting Style:	Pedestal

NavPod SailPod pre-cut f/Simrad NSS12 evo³ & B&G Zeus³ 12 f/9.5" Wide Guard User reviewsNavPod SailPod Pre-Cut f/Simrad NSS12 evo³ & B&G Zeus³ 12 f/9.5" Wide Guard Shipping & Returns

Shipping Weight:	5.8 lbs
Box sizes:	8.00 (h) x 11.00 (w) x 17.00 (l)
Cubic feet:	1496.0
Returnable:	Yes

For detailed shipping terms , please review our shipping policy and you can find our return and refund policy here.