Pre-cut NavPod SailPod for Simrad NSS9 evo3 and B&G Zeus3 9 f/12″ Wide Guard Boat Outfitting

Pre-cut SailPod for Simrad NSS9 evo3 and B&G Zeus3 9 for 12″ wide protection

SailPods are for mounting a single radar or chartplotter at the bar. Navigation at your fingertips… "Where and when you need it. » SailPods are the smart solution for mounting your radar or chart plotter at the helm, where you can easily operate it and clearly see every minute detail on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Tamper-proof nickel chrome screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. It is best to mount a SailPod on a single-curvature AngleGuard or the angled section of a double-curvature angle guard with an InstrumenttPod mounted above on the right section.

Structural Rigidity – Gen3 improvements now include thicker support. Acrylic cap gauge ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SailPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker external silicone sealais with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the SailPod in the future to repair your electrical device. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Tamper-proof nickel-chrome-plated stainless steel screws provide security combined with a bit of style!

Commitment to quality – NavPod delivers on its commitment by offering a 10-year warranty on all new NavPod Gen3s.

SailPods are useds to install a single radar or chartplotter on the helmet. SailPods is a smart solution that installs a radar or chartplotter on the helm, you can easily install it on an aircraft.
PRODUCT ID: 79426
SKU: NVN-79426
CSKU: CWR- 79426
REWRITE: 90537-navpod-sailpod-pre-cut-f-simrad-nss9-evo3
MPN: GP2050-06
UPC: 659988113969
ASIN: B07R6MBRLN
WSKU: NAVGP205006
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod SailPod Pre-Cut f/Simrad NSS9 evo3 & B&G Zeus3 9 f/12″ Wide Guard
NAME_EX: NAVPOD SAILPOD PRECUT FOR SIMRAD NSS9 EVO 3 B&G ZEUS3
PTITLE: NavPod SailPod Precut f/Simrad NSS9 evo3 & B&G Zeus3 9 f/12″ Wide Guard
TYPE: Boat Equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS

NavPod GP2050-06 Pre-Cut SailPod for Simrad NSS9 evo3 / B&G Zeus3 9 for 12" large Guard
NavPod SailPod Pre-Cut f/Simrad NSS9 evo3 BG Zeus3 9 f/12 Wide Guard

Gtags:

Boat

GSpecs:

NavPod Pre-cut SailPod for Simrad NSS9 evo3 and B&G Zeus3 9 f/12″ Wide Guard Product description

Pre-cut SailPod for Simrad NSS9 evo3 and B&G Zeus3 9 for 12″ Wide Guard

SailPods allow you to mount a single radar or chart plotter at the helm. Navigation at your fingertips… "Where and when you need it. » SailPods are the smart solution for mounting your radar or chart plotter at the helm, where you can easily operate it and clearly see every minute detail on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Tamper-proof nickel chrome screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. A SailPod is best mounted on a Single Bend AngleGuard, or on the drysloping installation of a Double Bend Angle Guard with an InstrumentPod mounted above on the straight section.

Structural Rigidity – Gen3 enhancements now include thicker gauge acrylic coated ABS material which improves strength and offers better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SailPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditions. The improvementsGen3 ations include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane seal is now 50% thicker and is not subject to "compression" like human rubber compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Commitment to quality – NavPod delivers on its commitment by offering a 10-year warranty on all new NavPod Gen3s.

SailPods are used to install a single radar or chartplotter on the helmet. SailPods is a smart solution that installs a radar or chart plotter on the helm, you can easily install it on an aircraft.

Frequently asked questions (FAQ) about the NavPod SailPod Pre-Cut f/Simrad NSS9 evo3 & B&G Zeus3 9 f/12″ Wide Guard Who is the NavPod?
How to describe the NavPod SailPod Pre-Cut f/Simrad NSS9 evo3 & B&G Zeus3 9 f/12″ Wide Guard?
Is it cut or not?
How to mount or what is the mounting style of the NavPod SailPod Pre-Cut f/Simrad NSS9 evo3 & B&G Zeus3 9 f/12″ Wide Guard?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include B-jointwaterproof licone, tamper-resistant fasteners for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod SailPod Pre-Cut f/Simrad NSS9 evo3 & B&G Zeus3 9 f/12″ Wide Guard? SailPods are used to install a single radar or chartplotter on the helmet. SailPods is a smart solution that installs With a radar or chart plotter on the helm, you can easily install it on an aircraft. Is it cut or uncut? Cut How to mount or what is the mounting style of NavPod SailPod Pre-Cut f/Simrad NSS9 evo3 & B&G Zeus3 9 f/12″ Wide Guard? Pedestal

Save $106 when you purchase the NavPod SailPod Pre-Cut f/Simrad NSS9 evo3 and B&G Zeus3 9 f/12″ Wide Guard for only $343 from NVN Marine! Same day dispatch before 3 p.m. NavPod SailPod Pre-Cut f/Simrad NSS9 evo3 & B&G Zeus3 9 f/12″ Wide Guard Technical specifications

Type:	Boat equipment \| Display Media
Supplier:	NavPod
Weight:	5.75 lbs
Cut/Uncut:	Couped
Mounting Style:	Pedestal

NavPod SailPod pre-cut for Simrad NSS9 evo3 and B&G Zeus3 9 f/12″ Wide Guard User reviewsNavPod SailPod pre-cut for Simrad NSS9 evo3 and B&G Zeus3 9 f/12″ Wide Guard Shipping and returns

Shipping Weight:	5.75 lbs
Box Sizes:	8.00 (h) x 12.00 (w) x 16.00 (w)
Cubic feet:	1536.0
Returnable:	Yes

For detailed shipping terms, please see our shipping policy and you can find our return policyand refund here.